Product Name：HR82 Safety Helmet Yellow
Standards： ANSI Z89.1
Material： High impact resistance ABS
Blue (HR82BL) , Yellow (HR82YE)
- Shock absorption (ANSI)
In the event of impact, the 8-point harness design is capable of improving the distribution of the force over the entire head to reduce the damage caused by the impact. 4 cones have been placed along the joints of the helmet harness and shell to absorb a portion of the incoming forces and provide the user with greater protection against impacts.
According to standard testing methods provided in ANSI Z89.1, a standard 3.6 kg striker hit the safety helmet at a velocity of 5.5 m/s. The helmet should afford sufficient protection to the wearer’s head and ensure that the force of impact transmitted to the head does not exceed 4450N.
- Penetration Protection (ANSI)
According to standard testing methods provided in ANSI Z89.1, a standard 1 kg penetrator hit the safety helmet at a speed of 7.0 m/s. The helmet should afford sufficient protection to the wearer’s head and prevent any injury caused by the puncture hammer.
- ANSI Z89.1 Class E (Electrical)
Class E helmets are intended to reduce the danger of contact with higher voltage conductors. The helmets are proof-tested at 20,000 volts (phase to ground). This voltage is not intended as an indication of the voltage at which the helmet protects the wearer.
- Made in Taiwan
High impact resistance ABS
Blue (HR82BL), Yellow (HR82YE)
8-point nylon suspension